MVR EVAPORATOR (ROCK-E)
TDS Heavy Metal Oil & Grease High COD
The way for solution of problem of wastewater is MVR evaportor (Rock-E) MVR evaporator (Rock-E) is best for treatment have high TDS wastewater, Heavy metals wastewater, High grease and oil wastewater etc.
What's MVR evaporator?
Mechanical Vapor Recompression
This is an evaporator concentrator that recompresses moisture (vapor) evaporated in an evaporator using a compressor and reuse it as a heat source.
  • Large capacity
    Available for large flow rate such as 20-120 m3/day.
  • Easy maintenance
    Easy maintenance by using plate heat exchanger for the main heater.
  • Ecconomical design
    Saving initial cost and operation cost adopt with MVR heat pump technology.
  • Stable running
    Adopted advanced IEC (Intelligent Evaporation Control) technology and realized stable continuous operation.
MODEL & SPEC
MODEL TYPE-1 TYPE-2 TYPE-3 TYPE-4 TYPE-5 TYPE-6
Capacity 20m3/day 40m3/day 60m3/day 75m3/day 90m3/day 120m3/day
Start up steam 0.3-0.8MPa 200kg 300kg 450kg 540kg 600kg 600kg
Power
consumption 3P380V50Hz 		56kwh 91kwh 134kwh 145kwh 170kwh 220kwh
Soft water Normal
temperature 		150 L/hr 200 L/hr 300 L/hr 300 L/hr 400 L/hr 500 L/hr
Compressor air 0.5MPa
or above 		5m3(N)/hr
Installation area For reference
W : 5,500
D : 7,500
H : 7,000
W : 7,000
D : 7,500
H : 8,000
W : 9,500
D : 7,500
H : 9,000
W : 10,000
D : 8,500
H : 10,500
W : 10,000
D : 8,600
H : 10,750
W : 10,000
D : 9,000
H : 10,750
This device is a evaporation and concentrating device with high flow rate and low running cost which adopt advanced MVR type heat pump technology.
System Flow
COPYRIGHT ROCK ENGINEERING CO., LTD. ALL RIGHTS RESERVED